1000 Series | GP 1010F

The 1000 Series is E/One's most versatile grinder pump station — a range of basins, covers, discharges, inlets and panels are available.The GP 1010F is suitable for an area that floods.

Model 1010F grinder pump station from E/One can be isntalled in flood-prone areas

Features | Operational Information | Drawings & Installation Instructions

Operational Information

Motor
1 HP, 1,725 RPM, high torque, capacitor start, thermally protected, 120/240 V / 60 Hz, one phase

Inlet Connections
4" PVC inlet flange for Schedule 40 pipe

Discharge Connections
Pump discharge terminates in 1-1/4" socket for PVC solvent weld. Can easily be adapted to 1-1/4" PVC pipe or any other material required by local codes.

Discharge
15 gpm at 0 psig
11 gpm at 40 psig
9 gpm at 60 psig

Overload Capacity
The maximum pressure that the pump can generate is limited by the motor characteristics. The motor generates a pressure well below the rating of the piping and appurtenances. The automatic reset feature does not require manual operation following overload.