Indoor Units

For years, E/One grinder pumps have set the standard in low pressure sewer system technology. They worked harder. Lasted longer. And required virtually no maintenance.

Once again, we're going places. A place where other grinder pumps just can't go. Inside. With an indoor unit that installs in a matter of minutes, has a clean desig, and seems at home with other household appliances.

Introducing the E/One 2010-IDU. It's quiet. Clean. Efficient. Safe. Easy to install. And easy to live with.

It can be used as part of a new E/One Sewer System or retrofit into an existing low-pressure or gravity system.

If you're ready to take your construction new places, don't settle for the status quo. Go new places. With the E/One 2010-IDU Home Wastewater Disposal System.

Features | Operational Information | Drawings & Installation Instructions

Operational Information

Motor:
1 hp, 1725 rpm, high torque, capacitor start, thermally protected, 240V, 60Hz, 1 phase

Inlet Connection:
4-inch PVC socket weld

Discharge Connection:
Pump discharge terminates in 1-1/4" NPT female thread. Can be adapted to 1-1/4" PVC pipe or any other material required by local codes.

Discharge*:
15 gpm at 0 psig
11 gpm at 40 psig
9 gpm at 60 psig
*Discharge data includes loss through check valve, which is minimal

Overload Capacity:
The maximum pressure that the pump can generate is limited by the motor's characteristics. The motor generates a pressure well below the rating of the piping and appurtenances. The automatic reset feature does not require manual operation following overload.

Alarm Display:
An audio/visual alarm with a battery backup indicates any loss of power to the unit.
Dimensions:
29" x 37" x 35"